Floating Tablet

By: Pharma Tips | Views: 18363 | Date: 03-Jun-2010

The design of floating drug delivery Systems (FDDS) should be primarily aimed to achieve more predictable and increased bioavailability. Now-a-days most of the pharmaceutical scientist is involved in developing the ideal FDDS. This ideal system should have advantage of single dose for the whole duration of treatment and it should deliver the active drug directly at the specific site. Scientists have succeeded to develop a system and it encourages the scientists to develop control release tablet

1. Introduction
The design of floating drug delivery Systems (FDDS) should be primarily aimed to achieve more predictable and increased bioavailability. Now-a-days most of the pharmaceutical scientist is involved in developing the ideal FDDS. This ideal system should have advantage of single dose for the whole duration of treatment and it should deliver the active drug directly at the specific site. Scientists have succeeded to develop a system and it encourages the scientists to develop control release tablet. Control release implies the predictability and reproducibility to control the drug release, drug concentration in target tissue and optimization of the therapeutic effect of a drug by controlling its release in the body with lower and less frequent dose.

Under certain circumstances prolonging the gastric retention of a delivery system is desirable for achieving greater therapeutic benefit of the drug substances. For example, drugs that are absorbed in the proximal part of the gastrointestinal tract, and the drugs that are less soluble or are degraded by the alkaline pH may benefit from the prolong gastric retention. In addition, for local and sustained drug delivery to the stomach and the proximal small intestine to treat certain conditions, prolonging gastric retention of the therapeutic moiety may offer numerous advantages including improved bioavailability, therapeutic efficacy and possible reduction of the dose size. Gastric emptying of dosage forms is an extremely variable process and ability to prolong and control the emptying time is a valuable asset for dosage forms, which reside in the stomach for a longer period of time than conventional dosage forms. Several difficulties are faced in designing controlled release systems for better absorption and enhanced bioavailability. One of such difficulties is the inability to confine the dosage form in the desired area of the gastrointestinal tract. Drug absorption from the gastrointestinal tract is a complex procedure and is subject to many variables. It is widely acknowledged that the extent of gastrointestinal tract drug absorption is related to contact time with the small intestinal mucosa. Thus, small intestinal transit time is an important parameter for drugs that are incompletely absorbed. Basic human physiology with the details of gastric emptying, motility patterns, and physiological and formulation variables affecting the cosmic emptying are summarized.
Gastro retentive systems can remain in the gastric region for several hours and hence significantly prolong the gastric residence time of drugs. Prolonged gastric retention improves bioavailability, reduces drug waste, and improves solubility for drugs that are less soluble in a high pH environment. It has applications also for local drug delivery to the stomach and proximal small intestines. Gastro retention helps to provide better availability of new products with new therapeutic possibilities and substantial benefits for patients.

2. Basic Gastrointestinal Tract Physiology
Anatomically the stomach is divided into 3 regions: fundus, body, and antrum (pylorus). The proximal part made of fundus and body acts as a reservoir for undigested material, whereas the antrum is the main site for mixing motions and act as a pump for gastric emptying by propelling actions.13
Gastric emptying occurs during fasting as well as fed states. The pattern of motility is however distinct in the 2 states. During the fasting state an interdigestive series of electrical events take anatomically the stomach is divided into 3 regions: fundus, body, and antrum (pylorus). The place, which cycle both through stomach and intestine every 2 to 3 hours.14 This is called the interdigestive myloelectric cycle or migrating myloelectric cycle (MMC), which is further divided into following 4 phases as described by Wilson and Washington.15
1. Phase I (basal phase) lasts from 40 to 60 minutes with rare contractions. 
2. Phase II (preburst phase) lasts for 40 to 60 minutes with intermittent action potential and contractions. As the phase progresses the intensity and frequency also increases gradually. 
3. Phase III (burst phase) lasts for 4 to 6 minutes. It includes intense and regular contractions for short period. It is due to this wave that all the undigested material is swept out of the stomach down to the small intestine. It is also known as the housekeeper wave. 
4. Phase IV lasts for 0 to 5 minutes and occurs between phases III and I of 2 consecutive cycles. 
After the ingestion of a mixed meal, the pattern of contractions changes from fasted to that of fed state. This is also known as digestive motility pattern and comprises continuous contractions as in phase II of fasted state. These contractions result in reducing the size of food particles (to less than 1 mm), which are propelled toward the pylorus in a suspension form. During the fed state onset of MMC is delayed resulting in slowdown of gastric emptying rate.16
Scintigraphic studies determining gastric emptying rates revealed that orally administered controlled release dosage forms are subjected to basically 2 complications, that of short gastric residence time and unpredictable gastric emptying rate

3. Factors Affecting Gastric Retention
Gastric residence time of an oral dosage form is affected by several factors.  
o Size-To pass through the pyloric valve into the small intestine the particle size should be in the range of 1 to 2 mm. The ph of the stomach in fasting state is ~1.5 to 2.0 and in fed state is 2.0 to 6.0. A large volume of water administered with an oral dosage form raises the pH of stomach contents to 6.0 to 9.0. Nature of meal-stomach doesn’t get time to produce sufficient acid when the liquid empties the stomach; hence generally basic drugs have a better chance of dissolving in fed state than in a fasting state. The rate of gastric emptying depends mainly on viscosity, volume, and caloric content of meals. Nutritive density of meals helps determine gastric emptying time. It does not make any difference whether the meal has high protein, fat, or carbohydrate content as long as the caloric content is the same. However, increase in acidity and caloric value slows down gastric emptying time. 
o Biological factors- Biological factors such as age, body mass index (bmi), gender, posture, and diseased states (diabetes, chron’s disease) influence gastric emptying. In the case of elderly persons, gastric emptying is slowed down.
o Sex-Generally females have slower gastric emptying rates than males. Stress increases gastric emptying rates while depression slows it down.
o Volume of liquids -The resting volume of the stomach is 25 to 50 ml. Volume of liquids administered affects the gastric emptying time. When volume is large, the emptying is faster. Fluids taken at body temperature leave the stomach faster than colder or warmer fluids. 
o Fed state-Studies have revealed that gastric emptying of a dosage form in the fed state can also be influenced by its size. Small-size tablets leave the stomach during the digestive phase while the large-size tablets are emptied during the housekeeping waves. Timmermans and Andre studied the effect of size of floating and nonfloating dosage forms on gastric emptying and concluded that the floating units remained buoyant on gastric fluids. These are less likely to be expelled from the stomach compared with the nonfloating units, which lie in the antrum region and are propelled by the peristaltic waves. It has been demonstrated using radio labeled technique that there is a difference between gastric emptying times of a liquid, digestible solid, and indigestible solid. It was suggested that the emptying of large (91 mm) indigestible objects from stomach was dependent upon interdigestive migrating myoelectric complex. When liquid and digestible solids are present in the stomach, it contracts ~3 to 4 times per minute leading to the movement of the contents through partially opened pylorus. Indigestible solids larger than the pyloric opening are propelled back and several phases of myoelectric activity take place when the pyloric opening increases in size during the housekeeping wave and allows the sweeping of the indigestible solids. Studies have shown that the gastric residence time (GRT) can be significantly increased under the fed conditions since the MMC is delayed.
o Formulation parameter-Several formulation parameters can affect the gastric residence time. 
o Single or multiple unit formulation-More reliable gastric emptying patterns are observed for multiparticulate formulations as compared with single unit formulations, which suffer from “all or none concept.” As the units of multiparticulate systems are distributed freely throughout the gastrointestinal tract, their transport is affected to a lesser extent by the transit time of food compared with single unit formulation.
o Size and shape- size and shape of dosage unit also affect the gastric emptying. Garg and Sharma reported that tetrahedron- and ring-shaped devices have a better gastric residence time as compared with other shapes. The diameter of the dosage unit is also equally important as a formulation parameter. Dosage forms having a diameter of more than 7.5 mm show a better gastric residence time compared with one having 9.9 mm.
o     Density-The density of a dosage form also affects the gastric emptying rate. A buoyant dosage form having a density of less than that of the gastric fluids floats. Since it is away from the pyloric sphincter, the dosage unit is retained in the stomach for a prolonged period. Density of the dosage form should be less than the gastric contents (1.004gm/ml).
o  Floating and nonfloating dosage units -On comparison of floating and nonfloating dosage units, it was concluded that regardless of their sizes the floating dosage units remained buoyant on the gastric contents throughout their residence in the gastrointestinal tract, while the nonfloating dosage units sank and remained in the lower part of the stomach. Floating units away from the gastroduodenal junction were protected from the peristaltic waves during digestive phase while the nonfloating forms stayed close to the pylorus and were subjected to propelling and retropelling waves of the digestive phase. It was also observed that of the floating and nonfloating units, the floating units were had a longer gastric residence time for small and medium units while no significant difference was seen between the 2 types of large unit dosage forms. When subjects were kept in the supine position it was observed that the floating forms could only prolong their stay because of their size; otherwise the buoyancy remained no longer an advantage for gastric retention.
o Nature of Meal -Feeding of indigestible polymers of fatty acid salts can change the motility pattern of the stomach to a fed state, thus decreasing the gastric emptying rate and prolonging the drug release.

4. Approaches to Design Floating Dosage Forms
The following approaches have been used for the design of floating dosage forms (tablets) of single- and multiple-unit systems.23
A) Single-Unit Dosage Forms
In Low-density approach4 the globular shells apparently having lower density than that of gastric fluid can be used as a carrier for drug for its controlled release. A buoyant dosage form can also be obtained by using a fluid-filled system that floats in the stomach.In coated shells24 popcorn, poprice, and polystyrol have been exploited as drug carriers. Sugar polymeric materials such as methacrylic polymer and cellulose acetate phthalate have been used to undercoat these shells. These are further coated with a drug-polymer mixture. The polymer of choice can be either ethylcellulose or hydroxypropyl cellulose depending on the type of release desired. Finally, the product floats on the gastric fluid while releasing the drug gradually over a prolonged duration.
Fluid- filled floating chamber25 type of dosage forms includes incorporation of a gas-filled floatation chamber into a microporous component that houses a drug reservoir. Apertures or openings are present along the top and bottom walls through which the gastrointestinal tract fluid enters to dissolve the drug. The other two walls in contact with the fluid are sealed so that the undissolved drug remains therein. The fluid present could be air, under partial vacuum or any other suitable gas, liquid, or solid having an appropriate specific gravity and an inert behavior. The device is of swallowable size, remains afloat within the stomach for a prolonged time, and after the complete release the shell disintegrates, passes off to the intestine, and is eliminated. Hydrodynamically balanced systems (HBS) are designed to prolong the stay of the dosage form in the gastro intestinal tract and aid in enhancing the absorption. Such systems are best suited for drugs having a better solubility in acidic environment and also for the drugs having specific site of absorption in the upper part of the small intestine. To remain in the stomach for a prolonged period of time the dosage form must have a bulk density of less than 1. It should stay in the stomach, maintain its structural integrity, and release drug constantly from the dosage form. HBS of chlordiazeopoxide hydrochloride26 had comparable blood level time profile as of three 10-mg commercial capsules. HBS can either be formulated as a floating tablet or capsule. Many polymers and polymer combinations with wet granulation as a manufacturing technique have been explored to yield floatable tablets.
Various types of tablets (bilayered and matrix) have been shown to have floatable characteristics. Some of the polymers used are hydroxypropyl cellulose, hydroxypropyl methylcellulose, crosspovidone, sodium carboxymethyl cellulose, and ethyl cellulose.Self-correcting floatable asymmetric configuration drug delivery system23employs a disproportionate 3-layer matrix technology to control drug release.
The 3-layer principle has been improved by development of an asymmetric configuration drug delivery system in order to modulate the release extent and achieve zero-order release kinetics by initially maintaining a constant area at the diffusing front with subsequent dissolution/erosion toward the completion of the release process. The system was designed in such a manner that it floated to prolong gastric residence time in vivo, resulting in longer total transit time within the gastrointestinal tract environment with maximum absorptive capacity and consequently greater bioavailability. This particular characteristic would be applicable to drugs that have pH-dependent solubility, a narrow window of absorption, and are absorbed by active transport from either the proximal or distal portion of the small intestine.
Single-unit formulations are associated with problems such as sticking together or being obstructed in the gastrointestinal tract, which may have a potential danger of producing irritation.

B) Multiple-Unit Dosage Forms
The purpose of designing multiple-unit dosage form is to develop a reliable formulation that has all the advantages of a single-unit form and also is devoid of any of the above mentioned disadvantages of single-unit formulations. In pursuit of this endeavor many multiple-unit floatable dosage forms have been designed. Microspheres have high loading capacity and many polymers have been used such as albumin, gelatin, starch, polymethacrylate, polyacrylamine, and polyalkylcyanoacrylate. Spherical polymeric microsponges, also referred to as “microballoons,” have been prepared. Microspheres have a characteristic internal hollow structure and show an excellent in vitro floatability.27 In Carbon dioxide–generating multiple-unit oral formulations28 several devices with features that extend, unfold, or are inflated by carbon dioxide generated in the devices after administration have been described in the recent patent literature. These dosage forms are excluded from the passage of the pyloric sphincter if a diameter of ~12 to 18 mm in their expanded state is exceeded.

5. Classification of Floating tablets
Floating tablets are classified depending on the use of 2 formulation variables: effervescent and non-effervescent systems.
A) Effervescent Floating tablets
These are matrix types of systems prepared with the help of swellable polymers such as methylcellulose and chitosan and various effervescent compounds, eg, sodium bicarbonate, tartaric acid, and citric acid. They are formulated in such a way that when in contact with the acidic gastric contents, CO2 is liberated and gets entrapped in swollen hydrocolloids, which provides buoyancy to the dosage forms.
Ichikawa et al28 developed a new multiple type of floating dosage system composed of effervescent layers and swellable membrane layers coated on sustained release pills. The inner layer of effervescent agents containing sodium bicarbonate and tartaric acid was divided into 2 sublayers to avoid direct contact between the 2 agents. These sublayers were surrounded by a swellable polymer membrane containing polyvinyl acetate and purified shellac. When this system was immersed in the buffer at 37ºC, it settled down and the solution permeated into the effervescent layer through the outer swellable membrane. CO2 was generated by the neutralization reaction between the 2 effervescent agents, producing swollen pills (like balloons) with a density less than 1.0 g/mL. It was found that the system had good floating ability independent of pH and viscosity and the drug (para-amino benzoic acid) released in a sustained manner28.
Yang et al30 developed a swellable asymmetric triple-layer tablet with floating ability to prolong the gastric residence time of triple drug regimen (tetracycline, metronidazole, and clarithromycin) in Helicobacter pylori–associated peptic ulcers using hydroxy propyl methyl cellulose (HPMC) and poly (ethylene oxide) (PEO) as the rate-controlling polymeric membrane excipients. The design of the delivery system was based on the swellable asymmetric triple-layer tablet approach. Hydroxypropylmethylcellulose and poly(ethylene oxide) were the major rate-controlling polymeric excipients. Tetracycline and metronidazole were incorporated into the core layer of the triple-layer matrix for controlled delivery, while bismuth salt was included in one of the outer layers for instant release. The floatation was accomplished by incorporatinga gas-generating layer consisting of sodium bicarbonate: calcium carbonate (1:2 ratios) along with the polymers. The in vitro results revealed that the sustained delivery of tetracycline and metronidazole over 6 to 8 hours could be achieved while the tablet remained afloat. The floating feature aided in prolonging the gastric residence time of this system to maintain high-localized concentration of tetracycline and metronidazole.
Ozdemir et al31 developed floating bilayer tablets with controlled release for furosemide. The low solubility of the drug could be enhanced by using the kneading method, preparing a solid dispersion with β cyclodextrin mixed in a 1:1 ratio. One layer contained the polymers HPMC 4000, HPMC 100, and CMC (for the control of the drug delivery) and the drug. The second layer contained the effervescent mixture of sodium bicarbonate and citric acid. The in vitro floating studies revealed that the lesser the compression force the shorter is the time of onset of floating, ie, when the tablets were compressed at 15 MPa, these could begin to float at 20 minutes whereas at a force of 32 MPa the time was prolonged to 45 minutes. Radiographic studies on 6 healthy male volunteers revealed that floating tablets were retained in stomach for 6 hours and further blood analysis studies showed that bioavailability of these tablets was 1.8 times that of the conventional tablets. On measuring the volume of urine the peak diuretic effect seen in the conventional tablets was decreased and prolonged in the case of floating dosage form.
Choi et al32 prepared floating alginate beads using gas-forming agents (calcium carbonate and sodium bicarbonate) and studied the effect of CO2 generation on the physical properties, morphology, and release rates. The study revealed that the kind and amount of gas-forming agent had a profound effect on the size, floating ability, pore structure, morphology, release rate, and mechanical strength of the floating beads. It was concluded that calcium carbonate formed smaller but stronger beads than sodium bicarbonate. Calcium carbonate was shown to be a less-effective gas-forming agent than sodium bicarbonate but it produced superior floating beads with enhanced control of drug release rates. In vitro floating studies revealed that the beads free of gas-forming agents sank uniformly in the media while the beads containing gas-forming agents in proportions ranging from 5:1 to 1:1 demonstrated excellent floating (100%).
Li et al33, 34 evaluated the contribution of formulation variables on the floating properties of a gastro floating tablets using a continuous floating monitoring device and statistical experimental design. The formulation was conceived using taguchi design. HPMC was used as a low-density polymer and citric acid was incorporated for gas generation. Analysis of variance (ANOVA) test on the results from these experimental designs demonstrated that the hydrophobic agent magnesium stearate could significantly improve the floating capacity of the delivery system. High-viscosity polymers had good effect on floating properties. The residual floating force values of the different grades of HPMC were in the order K4 M~ E4 M~K100 LV> E5 LV but different polymers with same viscosity, ie, HPMC K4M, HPMC E4M did not show any significant effect on floating property. Better floating was achieved at a higher HPMC/carbopol ratio and this result demonstrated that carbopol has a negative effect on the floating behavior.
Penners et al35 developed an expandable tablet containing mixture of polyvinyl lactams and polyacrylates that swell rapidly in an aqueous environment and thus reside in stomach over an extended period of time. In addition to this, gas-forming agents were incorporated. As the gas formed, the density of the system was reduced and thus the system tended to float on the gastric contents.
Fassihi and Yang36 developed a zero-order controlled release multilayer tablet composed of at least 2 barrier layers and 1 drug layer. All the layers were made of swellable, erodible polymers and the tablet was found to swell on contact with aqueous medium. As the tablet dissolved, the barrier layers eroded away to expose more of the drug. Gas-evolving agent was added in either of the barrier layers, which caused the tablet to float and increased the retention of tablet in a patient’s stomach.
Talwar et al37 developed a once-daily formulation for oral administration of ciprofloxacin. The formulation was composed of 69.9% ciprofloxacin base, 0.34% sodium alginate, 1.03% xanthum gum, 13.7% sodium bicarbonate, and 12.1% cross-linked poly vinyl pyrrolidine. The viscolysing agent initially and the gel-forming polymer later formed a hydrated gel matrix that entrapped the gas, causing the tablet to float and be retained in the stomach or upper part of the small intestine (spatial control). The hydrated gel matrix created a tortuous diffusion path for the drug, resulting in sustained release of the drug (temporal delivery).
Two patents granted to Alza Corporation revealed a device having a hollow deformable unit that was convertible from a collapsed to expandable form and vice versa. The deformable unit was supported by a housing that was internally divided into 2 chambers separated by a pressure-sensitive movable bladder. The first chamber contained the therapeutic agent and the second contained a volatile liquid (cyclopentane, ether) that vaporized at body temperature and imparted buoyancy to the system. The system contained a bioerodible plug to aid in exit of the unit from the body.38,39
Baumgartner et al40 developed a matrix-floating tablet incorporating a high dose of freely soluble drug. The formulation containing 54.7% of drug, HPMC K4 M, Avicel PH 101, and a gas-generating agent gave the best results. It took 30 seconds to become buoyant. In vivo experiments with fasted state beagle dogs revealed prolonged gastric residence time. On radiographic images made after 30 minutes of administration, the tablet was observed in animal’s stomach and the next image taken at 1 hour showed that the tablet had altered its position and turned around. This was the evidence that the tablet did not adhere to the gastric mucosa. The MMC (phase during which large nondisintegrating particles or dosage forms are emptied from stomach to small intestine) of the gastric emptying cycle occurs approximately every 2 hours in humans and every 1 hour in dogs but the results showed that the mean gastric residence time of the tablets was 240 ± 60 minutes (n = 4) in dogs. The comparison of gastric motility and stomach emptying between humans and dogs showed no big difference and therefore it was speculated that the experimentally proven increased gastric residence time in beagle dogs could be compared with known literature for humans, where this time is less than 2 hours.
Atyabi and coworkers42 developed a floating system using ion exchange resin that was loaded with bicarbonate by mixing the beads with 1 M sodium bicarbonate solution. The loaded beads were then surrounded by a semipermeable membrane to avoid sudden loss of CO2. Upon coming in contact with gastric contents an exchange of chloride and bicarbonate ions took place that resulted in CO2 generation thereby carrying beads toward the top of gastric contents and producing a floating layer of resin beads (Figure 4) .The in vivo behavior of the coated and uncoated beads was monitored using a single channel analyzing study in 12 healthy human volunteers by gamma radio scintigraphy. Studies showed that the gastric residence time was prolonged considerably (24 hours) compared with uncoated beads (1 to 3 hours).

B) Non-Effervescent Floating tablets
Non-effervescent floating tablets use a gel forming or swellable cellulose type of hydrocolloids, polysaccharides, and matrix-forming polymers like polycarbonate, polyacrylate, polymethacrylate, and polystyrene. The formulation method includes a simple approach of thoroughly mixing the drug and the gel-forming hydrocolloid. After oral administration this dosage form swells in contact with gastric fluids and attains a bulk density of < 1. The air entrapped within the swollen matrix imparts buoyancy to the dosage form. The so formed swollen gel-like structure acts as a reservoir and allows sustained release of drug through the gelatinous mass.
Thanoo et al43 developed polycarbonate microspheres by solvent evaporation technique. Polycarbonate in dichloromethane was found to give hollow microspheres that floated on water and simulated biofluids as evidenced by scanning electron microscopy (SEM). High drug loading was achieved and drug-loaded microspheres were able to float on gastric and intestinal fluids. It was found that increasing the drug-to-polymer ratio increased both their mean particle size and release rate of drug.
Nur and Zhang44 developed floating tablets of captopril using HPMC (4000 and 15 000 cps) and carbopol 934P. In vitro buoyancy studies revealed that tablets of 2 kg/cm2 hardness after immersion into the floating media floated immediately and tablets with hardness 4 kg/cm2 sank for 3 to 4 minutes and then came to the surface. Tablets in both cases remained floating for 24 hours. The tablet with 8 kg/cm2 hardness showed no floating capability. It was concluded that the buoyancy of the tablet is governed by both the swelling of the hydrocolloid particles on the tablet surface when it contacts the gastric fluids and the presence of internal voids in the center of the tablet (porosity). A prolonged release from these floating tablets was observed as compared with the conventional tablets and a 24-hour controlled release from the dosage form of captopril was achieved.
Bulgarelli et al45 studied the effect of matrix composition and process conditions on casein gelatin beads prepared by emulsification extraction method. Casein by virtue of its emulsifying properties causes incorporation of air bubbles and formation of large holes in the beads that act as air reservoirs in floating systems and serve as a simple and inexpensive material used in controlled oral drug delivery systems. It was observed that the percentage of casein in matrix increases the drug loading of both low and high porous matrices, although the loading efficiency of high porous matrices is lower than that of low porous matrices.
Fell et al46 prepared floating alginate beads incorporating amoxycillin. The beads were produced by dropwise addition of alginate into calcium chloride solution, followed by removal of gel beads and freeze-drying. The beads containing the dissolved drug remained buoyant for 20 hours and high drug-loading levels were achieved.
Streubel et al47 prepared single-unit floating tablets based on polypropylene foam powder and matrix-forming polymer. Incorporation of highly porous foam powder in matrix tablets provided density much lower than the density of the release medium. A 17% wt/wt foam powder (based on mass of tablet) was achieved in vitro for at least 8 hours. It was concluded that varying the ratios of matrix-forming polymers and the foam powder could alter the drug release patterns effectively.
Asmussen et al48 invented a device for the controlled release of active compounds in the gastrointestinal tract with delayed pyloric passage, which expanded in contact with gastric fluids and the active agent was released from a multiparticulate preparation. It was claimed that the release of the active compound was better controlled when compared with conventional dosage forms with delayed pyloric passage.
El-Kamel et al49 prepared floating microparticles of ketoprofen, by emulsion solvent diffusion technique. Four different ratios of Eudragit S 100 with Eudragit RL were used. The formulation containing 1:1 ratio of the 2 above-mentioned polymers exhibited high percentage of floating particles in all the examined media as evidenced by the percentage of particles floated at different time intervals. This can be attributed to the low bulk density, high packing velocity, and high packing factor.
Illum and Ping50 developed microspheres that released the active agent in the stomach environment over a prolonged period of time. The active agent was encased in the inner core of microspheres along with the rate-controlling membrane of a water-insoluble polymer. The outer layer was composed of bioadhesive (chitosan). The microspheres were prepared by spray drying an oil/water or water/oil emulsion of the active agent, the water-insoluble polymer, and the cationic polymer.
Streubel et al51 developed floating microparticles composed of polypropylene foam, Eudragit S, ethyl cellulose (EC), and polymethyl metha acrylate (PMMA) and were prepared by solvent evaporation technique. High encapsulation efficiencies were observed and were independent of the theoretical drug loading. Good floating behavior was observed as more than 83% of microparticles were floating for at least 8 hours. The in vitro drug release was dependent upon the type of polymer used. At similar drug loading the release rates increased in the following order PMMA < EC < Eudragit S. This could be attributed to the different permeabilities of the drug in these polymers and the drug distribution within the system.
Sheth and Tossounian52 developed hydrodynamically balanced sustained release tablets containing drug and hydrophilic hydrocolloids, which on contact with gastric fluids at body temperature formed a soft gelatinous mass on the surface of the tablet and provided a water-impermeable colloid gel barrier on the surface of the tablets. The drug slowly released from the surface of the gelatinous mass that remained buoyant on gastric fluids (Figure 6, A and B).
Bolton and Desai54 developed a noncompressed sustained release tablet that remained afloat on gastric fluids. The tablet formulation comprised 75% of drug and 2% to 6.5% of gelling agent and water. The noncompressed tablet had a density of less than 1 and sufficient mechanical stability for production and handling.
Kawashima et al prepared multiple-unit hollow microspheres by emulsion solvent diffusion technique. Drug and acrylic polymer were dissolved in an ethanol-dichloromethane mixture, and poured into an aqueous solution of PVA with stirring to form emulsion droplets. The rate of drug release in micro balloons was controlled by changing the polymer-to-drug ratio. Microballoons were floatable in vitro for 12 hours when immersed in aqueous media. Radiographical studies proved that microballoons orally administered to humans were dispersed in the upper part of stomach and retained there for 3 hours against peristaltic movements.55
Spickett et al57 invented an antacid preparation having a prolonged gastric residence time. It comprised 2 phases. The internal phase consisted of a solid antacid and the external phase consisted of hydrophobic organic compounds (mono-, di-, and triglycerides) for floating and a non-ionic emulsifier.
Franz and Oth58 described a sustained release dosage form adapted to release of the drug over an extended period of time. It comprised a bilayer formulation in which one layer consisted of drug misoprostal and the other had a floating layer. The uncompressed bilayer formulation was kept in a capsule and was shown to be buoyant in the stomach for 13 hours. The dosage form was designed in such a way that all the drug was released in the stomach itself.
Wu et al59 developed floating sustained release tablets of nimodipine by using HPMC and PEG 6000. Prior to formulation of floating tablets, nimodipine was incorporated into poloxamer-188 solid dispersion after which it was directly compressed into floating tablets. It was observed that by increasing the HPMC and decreasing the PEG 6000 content a decline in in vitro release of nimodipine occurred.
Wong et al60 developed a prolonged release dosage form adapted for gastric retention using swellable polymers. It consisted of a band of insoluble material that prevented the covered portion of the polymer matrix from swelling and provided a segment of a dosage form that was of sufficient rigidity to withstand the contractions of the stomach and delayed the expulsion of the dosage form from the stomach.
Mitra61 developed a sustained release multilayered sheet-like medicament device. It was buoyant on the gastric contents and consisted of at least 1 dry, self-supporting carrier film of water-insoluble polymer. The drug was dispersed or dissolved in this layer and a barrier film overlaid the carrier film. The barrier film was compsosed of 1 water-insoluble layer and another water-soluble and drug-permeable polymer or copolymer layer. The 2 layers were sealed together in such a way that pluralities of small air pockets were entrapped that gave buoyancy to the formulation.
Harrigan62 developed an intragastric floating tablet that was composed of a drug reservoir encapsulated in a microporous compartment having pores on top and bottom surfaces. However, the peripheral walls were sealed to prevent any physical contact of the drug in the reservoir with the stomach walls.
Joseph et al25 developed a floating dosage form of piroxicam based on hollow polycarbonate microspheres. The microspheres were prepared by the solvent evaporation technique. Encapsulation efficiency of ~95% was achieved. In vivo studies were performed in healthy male albino rabbits. Pharmacokinetic analysis was derived from plasma concentration vs time plot and revealed that the bioavailability from the piroxicam microspheres alone was 1.4 times that of the free drug and 4.8 times that of a dosage form consisting of microspheres plus the loading dose and was capable of sustained delivery of the drug over a prolonged period.
There are several commercial products available based on the research activity of floating drug delivery (Table 1).
Table 1. Marketed Preparations of Floating Drug Delivery Systems(Tablets)
   Product Active Ingredient
1 Madopar Levodopa and benserzide
2 Valrelease Diazepam
3 Topalkan Aluminum magnesium antacid
4 Almagate flatcoat Antacid

Effervescence is the reaction (in water) of acids and bases producing carbon dioxide. Typical acids used in this reaction are citric, malic, tartaric, adipic, and fumaric. Citric acid is the most commonly used, and it imparts a citrus-like taste to the product. Malic acid can be used in effervescent formulas for a smoother aftertaste, but the price of malic acid is higher than that of citric acid. Tartaric, adipic, and fumaric acids are used sparingly because of their low water solubilities. Typical bases used in the effervescent reaction are sodium bicarbonate, potassium bicarbonate, sodium carbonate, and potassium carbonate. Sodium bicarbonate is very common in effervescent formulas and produces a clear solution after tablet disintegration. When sodium levels are a concern, potassium bicarbonate is used. Both types of carbonates are used mainly as desiccants. Binders are normally necessary in effervescent tablets to bring the tablet hardness to a point where handling is possible. These binders should be water-soluble and include dextrose, sorbitol, xyitol, and lactose. A binder should be used very cautiously because binders can carry free moisture into the tablet, which is undesirable and can increase disintegration times when used in large quantities. The ideal amount of binder is one that makes the tablet hard enough to handle, but soft enough to disintegrate (the harder the tablet, the slower the disintegration) and dry enough to be stable.  Lubrication of effervescent tablets has historically been the main stumbling block to an acceptable, marketable product. Typical lubricants such as magnesium stearate are not useful due to their insolubility in water.
Most formulators have to use water-soluble lubricants such as sodium benzoate, polyethylene glycol, and adipic acid. These are minimally effective, and depend heavily on the type of granulation they are used in.
There are tablet presses that use lubrication spray on the punches so that the formula does not require lubrication. Depending on the product, formulators can use color (artificial or natural), sweeteners (acesulfame potassium,
Sodium saccharin, aspartame, and surcalose), and flavors (artificial or natural) to enhance a product or to mask off-notes derived from the active ingredients.

Effervescence is the evolution of gas bubbles from a liquid, as the result of a chemical reaction. The most common reaction for pharmaceutical purpose is the acid base reaction between sodium bicarbonate and citric acid. Acid-base reactions between alkali metal bicarbonates and citric or tartaric acid have been used for many years to produce pharmaceutical preparations that effervesce as soon as water is added.
3NaHCO3(aq) + H3C6H5O7(aq) 3H2O+CO2 + 3Na3C6H5O7(aq)


Effervescent tablets and powders are produced in much the same manner as conventional tablets and powders, but production must occur in very low humidity areas. Effervescent granulations can be mixed in conventional blending equipment, such as ribbon, twin-cone, and V-type blenders. All equipment should be well grounded and should allow you to make it completely and absolutely dry after wash-down. Any traces of moisture in the equipment will give erratic granulation results and most likely result in lost batches of product. Figure 1 shows a tablet press making an effervescent dosage. Wet granulation of the effervescent base can be performed by carefully adding 0.1 to 1.0 percent water (weight-to-weight basis) to the chosen blending equipment. The granulation steps must be precisely timed and the ingredients mixed thoroughly to distribute the solvent or binder solution evenly in the blend. The mix is then quickly discharged to drying ovens. It must constantly monitor the operational parameters of all equipment, especially drying equipment, as variations in drying times and temperatures can affect the finished product. While stable granulations will ultimately be made, vast differences in tablet hardness and disintegration times can result from over- or under-reacting the granulation. After drying, the granulation is sized, and a final mix is performed. Fluid-bed dryers have been used for many years to make effervescent granulations. Basically, the water or binder solution is sprayed onto the effervescent mixture while it is suspended in a stream of hot, dry air. The humidity and temperature of the air serve to stop the effervescent reaction quickly and uniformly. To ensure
that you produce a free-flowing granulation, chose the particle sizes carefully and monitor all systems closely. Vacuum granulators have also been used to make effervescent granulations. This equipment gives you a very controlled granulation of the product and allows a dust free environment. The equipment also generally requires less power and less operating space than other types of granulators. In operation, the water or binder solution is sprayed onto the effervescent mixture during blending. Drying occurs by placing the granulation under vacuum and heating it via a thermal jacket. Effervescent products normally require tablet presses that can deliver high compression forces. If the tablets are to be wrapped in foil or placed into a tube, give careful attention to the tablet parameters during compression. Monitor the tablet thickness to ensure the wrapping or packaging equipment can handle the tablets. Strict control of temperature and humidity in all areas is a must (65 to 75ºF, relative humidity of 10 percent), or the formulation will begin a chemical reaction after it’s packaged. In essence, the tablet will self-destruct because the byproducts of an effervescent reaction are water and carbon dioxide. The best way to stabilize an effervescent product is to produce it in an environment where humidity is under strict control and to package it in a suitable moisture barrier. All ingredients in the formulation must be anhydrous. Your contractor should test for free moisture before packaging.

7. Evaluation of floating floting tablets
                 Various parameters17 that need to be evaluated in gastro-retentive formulations include floating duration, dissolution profiles, specific gravity, content uniformity, hardness, and friability in case of solid dosage forms. In the case of multiparticulate drug delivery systems, differential scanning calorimetry (DSC), particle size analysis, flow properties, surface morphology, and mechanical properties are also performed.
A) Floating Ability and Dissolution Test
                  The tests for floating ability (Table 2) and drug release are generally performed in simulated gastric fluids at 37ºC.
Table 2. In Vitro Floating and Dissolution Performance
Drug (Polymer Used) Floating Media/Dissolution Medium and Method Ref
(HPMC K4 M) 500 mL of artificial gastric fluid pH 1.2 (without pepsin) at 100 rpm using USP XXIII dissolution apparatus. The time taken by the tablet to emerge on the water surface (floating lag time) and time until it floats on water surface was measured. 40

Amoxicillin beads
(Calcium alginate) For dissolution: 900 mL of deaerated 0.1 M HCl (pH 1.2) at 37ºC ± 1ºC in USP XXII dissolution tester at 50 rpm. 46

(Eudragit S100
Eudragit RL) 20 mL of simulated gastric fluid without pepsin, 50 mg of floating microparticles in 50-mL beakers were shaken horizontally in a water bath.
% age of floating micro particles was calculated.
For dissolution: 900 mL of either 0.1 N HCl or the phosphate buffer (pH 6.8) at 37ºC ± 0.1ºC in USP dissolution apparatus (I) at 100 rpm. 49

(Propylene foam, Eudragit RS,
ethyl cellulose, poly methyl meth acrylate) 30 mL of 0.1 N HCl (containing 0.02% wt/wt Tween 20), pH 1.2. Floatation was studied by placing 60 particles into 30-mL glass flasks. Number of settled particles was counted. 51

(Methocel K4M) 900 mL of enzyme-free 0.1 N HCl (pH 1.2) in USP XXIII apparatus II (basket method) at 37ºC at 75 rpm. 44

Polyethylene oxide) 0.1 N HCl in USP XXIII Apparatus II at 50 rpm at 37°C.
Its buoyancy to upper 1/3 of dissolution vessel was measured for each batch of tablet. 23

(β Cyclodextrin, HPMC 4000, HPMC 100,CMC, Polyethylene glycol) For dissolution: continuous flow through cell gastric fluid of pH 1.2, 45–50 m N/m by adding 0.02% Polysorbate 20 (to reduce the surface tension), the flow rate to provide the sink conditions was 9mL/min. 32

Aspirin, Griseofulvin,
p-Nitro Aniline
(polycarbonate, PVA) For dissolution: 500 mL of simulated gastric and intestinal fluid in 1000-mL Erlenmeyer flask. Flasks were shaken in a bath incubator at 37ºC. 43

Piroxicam (microspheres)
(Polycarbonate) For dissolution: 900 mL dissolution medium in USP paddle type apparatus at 37ºC at 100 rpm. 61

(Sodium alginate) For dissolution: 500 mL of distilled water, JP XII disintegration test medium No.1 (pH 1.2) and No.2 (pH 6.8) in JP XII dissolution apparatus with paddle stirrer at 50 rpm. 68

(HPC-L) An aliquot of 0.1 g of granules was immersed in 40 mL of purified water in a vessel at 37°C. Dried granules were weighed and floating percentage of granules was calculated.
For dissolution: flow sampling system (dissolution tester: DT-300, triple flow cell) followed by 900 mL of distilled water in JP XII with paddles at 37 ºC ± 0.5ºC at 100 rpm. 69

(CP 934P) For dissolution: 500 mL of each JP XII disintegration test medium No. 1 (pH 1.2) and No. 2 (pH 6.8) in JP XII dissolution apparatus at 37º C at 100 rpm. 70

Amoxicillin trihydrate
(HPC) For dissolution: 500–1000 mL (adequate to ensure sink conditions) of citrate/phosphate buffer of variable pH or solution of HCl (pH 1.2) in Erweka DT 6 dissolution tester fitted with paddles. 71

Ibuprofen, Tranilast
(Eudragit S) For dissolution: 900 mL dissolution medium (disintegration test medium No. 1 (pH 1.2) and No. 2 (pH 6.8) as specified in JP XI and as corresponding to USP XXI, paddle method at 37ºC at 100 rpm. 72

(HPMC) For dissolution: Method 1:
300 mL of artificial gastric fluid in a beaker, which was suspended in water bath at 37ºC agitated by magnetic stirrer and by bubbling CO2 free air.
Method 2:
500/1000 mL of 0.1 M HCl and surfactant lauryl sulfate dimethyl ammonium oxide with rotating paddle at 50 rpm. 73

Potassium chloride
(Metolose S.M. 100, PVP) For dissolution: tablet was mounted onto the perspex holder except one face of the matrix was set flush with one face of the holder at 37ºC and the other face of the tablet was prevented from the dissolution media by a rubber closure; good mixing was maintained in the receiver by a magnetic stirrer at 100 rpm. 74

(HPC-H, HPC-M, HPMC K15) For dissolution: water in USP XXIII dissolution apparatus (method II) at 50 rpm. 75

(Ethyl cellulose
HPC-L) 70 mL of 50 mM acetate buffer with various pH (1–5) or viscosity (25–115 cps) in a 100-mL beaker at 37°C, 100 rpm.
% age of floating pills was calculated.
For dissolution: 50 mM acetate buffer (pH 4) in JP XI dissolution tester with paddles at 37ºC at 100 rpm. 76

Tetracycline, metronidazole, bismuth salt
(Polyox, HPMC K4) 900 mL of 0.1 M HCl (pH 1.8) in USP dissolution apparatus at 50 rpm. The duration of floatation was observed visually. 30

(Acrylic polymer, Eudragit RS) Microballoons were introduced into 900 mL of disintegrating fluid solution no 1 (pH 1.2) containing Tween 20 (0.02% wt/vol) in USP XXII apparatus at 100 rpm . Percentage buoyancy was calculated.  55

Sotalol Lag time required for the tablet to start floating on the top of the basket in dissolution apparatus was measured 77

Furosemide Tablet were placed in a 400-mL flask at pH 1.2 and both the time needed to go upward and float on surface of the fluid and floating duration were determined. 31

Calcium carbonate
(HPMC K4M, E4 M and Carbopol) A continuous floating monitoring system was conceived. The upward floating force could be measured by the balance and the data transmitted to an online computer.
Test medium used was 900 mL simulated gastric fluid (pH 1.2) at 37ºC. 33

Timmermans and Andre18 characterized the buoyancy capability of floating forms and sinking of nonfloating dosage forms using an apparatus to quantitatively measure the total force acting vertically on the immersed object. It was given by the vectorial sum of buoyancy F(b) and gravitational forces F(g) acting on the test object. 
F   =   F ( b )   -   F ( g )  (1)
Equation 1 can be rewritten as, 
F   =   ( d f   -   d s )   g V   =   ( d f   -   W / V )   g V  (2)
Where F is the resultant weight of the object, df and ds represent the fluid density and solid object density, g is the acceleration due to gravity and W and V are the weight and volume of the test objects. It can be seen from Equation 2 that if the resultant weight is more positive, better floating is exhibited by the object.
Li et al33,34 invented an online continuous floating monitoring system that was a modification of the system described by Timmermans and Andre.18 It was used to provide quantitative measurement of resultant floating force. The set-up consisted of an analytical balance connected with a computer. A tablets was inserted into the sample holder basket and the holder was immersed into the test medium (900 mL of simulated gastric fluid). A typical floating kinetic curve was obtained by plotting floating force vs time and 4 parameters were used to describe the floating properties of the capsules from this graph: F max, T max, Fr, and AUC f . Similar to Equation 2 conceived by Timmermans and Andre18 the overall force that the tablets is subjected can be given by 
F   =   ( ρ m   -   ρ c )   g   V c  (3)
where ρm and ρc are the density of floating media and test object and Vc is the volume of the test object. In this equation, 2 parameters, ρc and Vc, are important for overall floating force. During the measurement of buoyancy, Vc increased due to swelling of polymer and ρc increased due to water uptake. This increase led to an upward rise in floating force curve, which reached a maximum (Fmax) and declined until an equilibrium was reached.
                     Table 2 gives dissolution tests generally performed using USP dissolution apparatus. USP 28 states “the dosage unit is allowed to sink to the bottom of the vessel before rotation of the blade is started. A small, loose piece of nonreactive material with not more than a few turns of a wire helix may be attached to the dosage units that would otherwise float.78 However standard USP or BP methods have not been shown to be reliable predictors of in vitro performance of floating dosage forms.24 Pillay and Fassihi79 applied a helical wire sinker to the swellable floating system of theophylline, which is sparingly soluble in water and concluded that the swelling of the system was inhibited by the wire helix and the drug release also slowed down. To overcome this limitation a method was developed in which the floating tablet was fully submerged under a ring or mesh assembly and an increase in drug release was observed. Also, it was shown that the method was more reproducible and consistent. However no significant change in the drug release was observed when the proposed method was applied to a swellable floating system of diltiazem, which is a highly water-soluble drug. It was thus concluded that the drug release from swellable floating systems was dependent upon uninhibited swelling, surface exposure, and the solubility of the drug in water.
B) Surface Morphology
                   Surface morphology was observed by SEM, which serves to confirm qualitatively a physical observation relating to surface area. In preparation of SEM analysis, the sample was exposed to high vacuum during the gold-coating process, which was needed to make the sample conductive.
C) Particle size
Sakuma et al81 prepared radiolabeled anionic poly metha acrylic acid nanoparticles and the particle size of nonlabeleled nanoparticles was measured by dynamic spectrophotometry.
D) In vivo gastric residence time
In vivo gastric residence time of a floating dosage form is determined by X-ray diffraction studies, gamma scintigraphy,22 or roentgenography82 (Table 3).
Table 3. In Vivo Evaluation
Drug (Polymer) Method Ref
(Eudragit S (BaSo4)) Two healthy male volunteers administered hard gelatin capsules packed with microballons (1000 mg) with 100 mL water. X-ray photographs at suitable intervals were taken.  55

(HPMC) Two phases:
Phase I (fasted conditions):
Five healthy volunteers (3 males and 2 females) in an open randomized crossover design, capsules ingested in sitting position with 100 mL of tap water.
Phase II (fed states):
Four subjects received normal or MR capsules in a crossover design after standard breakfast.
Venous blood samples were taken in heparinized tubes at predetermined time intervals after dosing. 73

PABA+ Isosorbide dinitrate Six healthy beagle dogs fasted overnight, then administered with capsules with 50 mL of water at 30 minutes after the meal.
Control study: same amount of control pills without the effervescent layer were administered in the same protocol.
The experimental design:
Crossover design, 1-week washout time, plasma samples were taken by repeated venipuncture at upper part of the leg.  76

Hydrogel composites Dogs (50 lbs) kept fasted and fed conditions.
In each experiment (fed or fasted) 300 mL of water was given before administration of the capsules; X-ray pictures were taken.  83

Amoxycillin trihydrate Six healthy fasted male subjects were selected; serum drug levels were compared in a single-dose crossover study following administration of tablets/capsules. 46

Floating beads Gamma scintigraphy:
In vivo behavior of coated and uncoated beads was monitored using a single channel analyzing study in 12 healthy human volunteers of mean age 34 yrs (22–49). 42

Pentoxyfillin Four healthy beagle dogs (fasted for 24 hours). Tablet was administered with 100 mL of water for radiographic imaging. The animal was positioned in a right lateral/ventrodorsal recumbency.  40

Furosemide Six purebred young male beagle dogs (9.6 to 14.3 kg), a 4-period crossover study balanced by residual effects was employed.
Dogs were fasted overnight (water ad libitum), a catheter was inserted into right and left cephalic vein with 0.3 mL heparin lock, blood sampling was done at appropriate intervals. 84

Polystyrene nanoparticles Dosing solution was administered to male SD strain rats fasted overnight
The radioactivity was measured with a gamma counter or a β counter (small intestine was cut into 10-cm portions). 63

Piroxicam Nine healthy male albino rabbits weighing 2.2–2.5 kg were divided into 3 groups and were fasted for 24 hours.
First batch: fed with 20 mg of Piroxicam powder in a gelatin capsule.
Second batch: 67% piroxicam loaded piroxicam microspheres (~20mg of drug).
Third batch: 7 mg of piroxicam and 67% piroxicam-loaded piroxicam microspheres (~20 mg of drug). 61

Calcium alginate multiple units floating beads Seven healthy males (21–55 years). After fasting from midnight the night before the subjects consumed cereal (30 g) with milk (150 ml) to which was added ~20 Ci .99 m Tc-DTPA?
An anterior image of stomach was obtained with γ camera.
Static 120-second anterior images were acquired at suitable intervals and subjects remained standing/sitting for the duration of the study. 85

Furosemide Six healthy males (60–71 kg) aged between 25 and 32 years for X-ray detection. Labeled tablets were given to subjects with 200 mL of water after a light breakfast, following ingestion. Gastric radiography revealed the duration for which the tablet stayed in stomach was determined. 31

Sulphiride Three 3.5-kg white male rabbits
10 mg of the drug/kg body weight was administered in a crossover manner with a 14-day washout period between dosing.
Both IV and oral dosage form were given. 69

8. Applications of floating drug delivery systems:
       Floating drug delivery offers several applications for drugs having poor bioavailability because of the narrow absorption window in the upper part of the gastrointestinal tract. It retains the dosage form at the site of absorption and thus enhances the bioavailability. These are summarized as follows.
(1) Sustained drug delivery:
              HBS systems can remain in the stomach for long periods and hence can release the drug over a prolonged period of time. The problem of short gastric residence time encountered with an oral CR formulation hence can be overcome with these systems. These systems have a bulk density of g1 as a result of which they can float on the gastric contents. These systems are relatively large in size and passing from the pyloric opening is prohibited. Recently sustained release floating capsules of nicardipine hydrochloride were developed and were evaluated in vivo. The formulation compared with commercially available micard capsules using rabbits. Plasma concentration time curves showed a longer duration for administration (16 hours) in the sustained release floating capsules as compared with conventional micard capsules (8 hours). 
 Similarly a comparative study between the madopar HBS and madopar standard formulation was done and it was shown that the drug was released up to 8 hours in vitro in the former case and the release was essentially complete in less than 30 minutes in the latter case.
 (2)Site-specific drug delivery:
               These systems are particularly advantageous for drugs that are specifically absorbed from stomach or the proximal part of the small intestine, eg, riboflavin and furosemide. Furosemide is primarily absorbed from the stomach followed by the duodenum. It has been reported that a monolithic floating dosage form with prolonged gastric residence time was developed and the bioavailability was increased. AUC obtained with the floating tablets was approximately 1.8 times those of conventional furosemide tablets. A bilayer-floating capsule was developed for local delivery of misoprostol, which is a synthetic analog of prostaglandin e1 used as a protectant of gastric ulcers caused by administration of NSAIDs. By targeting slow delivery of misoprostol to the stomach, desired therapeutic levels could be achieved and drug waste could be reduced.
 (3)Absorption enhancement 
              Drugs that have poor bioavailability because of site specific absorption from the upper part of the gastrointestinal tract are potential candidates to be formulated as floating drug delivery systems, thereby maximizing their absorption. A significant increase in the bioavailability of floating dosage forms (42.9%) could be achieved as compared with commercially available lasix tablets (33.4%) and enteric coated lasix-long product (29.5%).
Table 4 Enlists examples of various drugs formulated as different forms of floting tablets.
Tablets Chlorpheniraminemaleate, Theophylline, Furosemide, Ciprofolxacin, Pentoxyfillin, Captopril, Acetylsalicylicacid, Nimodipine, Amoxycillintrihydrate, VerapamilHCl,Isosorbidedinitrate, Sotalo, Atenolol, Isosorbidemononitrate, Acetaminophen, Ampicillin, Cinnarazine, Diltiazem, Florouracil, Piretanide, Prednisolone, Riboflavin- 5′ Phosphate
Drug absorption in the gastrointestinal tract is a highly variable procedure and prolonging gastric retention of the dosage form extends the time for drug absorption. FDDS promises to be a potential approach for gastric retention. Although there are number of difficulties to be worked out to achieve prolonged gastric retention, a large number of companies are focusing toward commercializing this technique.

Previous Page Next Page

People Searching On This Page:
  • floating tablet INTRODUCTION FROM PHARMa tips
  • floating tablets in market brands names
  • floating tablets in market brands
  • disintegration time for floating tablet
  • floating tablet example
  • marketed normal tablet
  • marketed product of effervescent floating tablet
  • marketed formulationa of floating tablet
  • floating tablets available in market
  • nmt4
  • example of floating agent
  • list of marketed floating tablets
  • yhsm-inucbr_001
  • floting tablet
  • Preparation of alginate beads for floating drug delivery system: effects of CO2 gas-forming agents

Related Pages

Tablet Counters & Tablet Counting Equipment

Tablet Counters & Tablet Counting Equipment

Articles | Pharmaceutical Equipment | Tablet
23-Mar-2013  Views: 4475

While most products that are packaged can be weighed or filled volumetrically, the Pharmaceutical industry does everything related to tablets, capsule ...
Evaluation of floating floting tablets

Evaluation of floating floting tablets

Articles | Pharmaceutics | Tablet
08-May-2011  Views: 55375

Various parameters17 that need to be evaluated in gastro-retentive formulations include floating duration, dissolution profiles, specific gravity, con ...
Formulation Of Effervescent Tablets

Formulation Of Effervescent Tablets

Articles | Pharmaceutics | Tablet
08-May-2011  Views: 18239

Effervescence is the reaction (in water) of acids and bases producing carbon dioxide. Typical acids used in this reaction are citric, malic, tartaric, ...
Classification of Floating tablets

Classification of Floating tablets

Articles | Pharmaceutics | Tablet
08-May-2011  Views: 8721

Floating tablets are classified depending on the use of 2 formulation variables: effervescent and non-effervescent systems. ...
Introduction of Floating Tablet

Introduction of Floating Tablet

Articles | Pharmaceutics | Tablet
08-May-2011  Views: 14093

The design of floating drug delivery Systems (FDDS) should be primarily aimed to achieve more predictable and increased bioavailability. Now-a-days mo ...
Post Your Comments (No Login Require)
Name : (required)
Email : (required)
Website :

Comment : (required)

40  + 9 =     
prakash chandra Dash  |  28-May-2012 10:47:04 IST
it is a nice information,thank u
Dick Venable  |  28-Jan-2023 09:05:46 IST
Hello pharmatips.in owner, Your posts are always well-referenced and credible.
People Searched About:
Floating Tablet INTRODUCTION FROM Pharma Tips   |   Floating Tablets In Market Brands Names   |   Floating Tablets In Market Brands   |   Disintegration Time For Floating Tablet   |   Floating Tablet Example   |   Marketed Normal Tablet   |   Marketed Product Of Effervescent Floating Tablet   |   Marketed Formulationa Of Floating Tablet   |   Yhsm-Inucbr_001   |   Floting Tablet   |   Preparation Of Alginate Beads For Floating Drug Delivery System: Effects Of CO2 Gas-Forming Agents   |   S100.Com.Br Loc:IN   |   Bilayered Floating Tablet   |   Dissolution Standard For Aspirin Effervescent Tablets For Oral Solution As Contained In USP 23 At Page 137.   |   Floated Tablet   |   Formulation Of Floating Tablets Of Highly Soluble Drugs   |   Is Bioavilabilty Affected By Floating Meds In Water   |   Yhs-002   |   Airticles Of Antihypertensive Bilayered Floating Tablets   |   Expandable Polystyrene   |   Floating Tablets   |  
Google : 1534 times | Yahoo : 141 times | Bing : 535 times |